Synthesizer Mode; Synthesizer Mode Functions - Casio CTK-691 User Manual

CTK691E01-01.book 44 ページ ２００３年９月２９日 月曜日 午後４時４７分

Synthesizer Mode

Synthesizer Mode
1 SYNTH
4 Number buttons
The Synthesizer Mode of this keyboard provides the tools for
creating your own original tones. Simply select one of the
built-in tones and change its parameters to create your own
original sound. You can even store your sounds in memory
and select it using the same procedure as that used to select a
preset tone.

Synthesizer Mode Functions

The following describes how to use each of the functions
available in the Synthesizer Mode.
Synthesizer Mode Parameters
The preset tones that are built into this keyboard consist of a
number of parameters. To create a user tone, you first recall
an advanced tone (000 to 299) or a preset tone (300 to 499) and
then change its parameters to change it to your own tone.
Note that drum set tones (500 through 515) cannot be used as
the basis of a user tone.
The illustration nearby shows the parameters that make up
the preset tones and what each parameter does. As can be
seen in the illustration, parameters can be divided into four
groups, each of which is described in detail below.
E-44
2 EXIT
5 [ + ]/[–]
Note that the tone whose parameter you can edit is the one
assigned to the channel (1 through 4) that is currently
selected with the Synthesizer Mode.
3 [ ]/[ ]/[ ]/[ ] CURSOR
705A-E-046A