Finishing With An Ending Pattern; Using One-Touch Preset; Using Auto Harmonize - Casio CTK-671 User Manual

Finishing with an Ending Pattern

You can end your performances with an ending pattern that
brings the rhythm pattern you are using to a natural-sound-
ing conclusion.
The following procedure describes how to insert an ending
pattern. Note that the actual ending pattern played depends
on the rhythm pattern you are using.
To finish with an ending pattern
While the rhythm is playing, press INTRO/ENDING
button 1 or 2.
• The timing when the ending pattern starts depends
on when you press the INTRO/ENDING button 1 or
2. If you press the button before the second beat of
the current measure, the ending pattern starts play-
ing immediately.
NOTE
• Pressing the button at any point in the measure after the sec-
ond beat results in the ending pattern playing from the begin-
ning of the following measure.

Using One-touch Preset

One-touch preset automatically makes the main settings list-
ed below in accordance with the rhythm pattern you are us-
ing.
• Keyboard tone
• Layer on/off
• Tempo
• Effect type
• Harmonize on/off
To use one-touch preset
1.
Select the rhythm you want to use.
2.
Use the MODE switch to select the accompani-
ment mode you want to use.
3.
Press the ONE TOUCH PRESET button.
• This automatically makes the one-touch preset set-
tings in accordance with the rhythm you selected.
• The keyboard automatically enters synchro standby
at this time.
4.
Start rhythm and Auto Accompaniment, and play
something on the keyboard.
• Accompaniment is played using the one-touch pre-
set settings.
703A-E-035A

Using Auto Harmonize

When you are using Auto Accompaniment, Auto Harmonize
automatically adds three additional notes to your melody in
accordance with the chord that is being played. The result is a
harmony effect that makes your melody line richer and fuller.
To use Auto Harmonize
1.
Use the MODE switch to select FINGERED or
CASIO CHORD as the accompaniment mode.
2.
Press AUTO HARMONIZE to turn on Auto Har-
monize.
• This causes an indicator to appear next to AUTO
HARMONIZE on the display.
3.
Start Auto Accompaniment play, and play some-
thing on the keyboard.
4.
To turn off Auto Harmonize, press AUTO HAR-
MONIZE once.
• This causes the indicator next to AUTO HARMONIZE
to disappear.
NOTE
• Auto Harmonize turns off temporarily whenever you start demo
tune play. It turns back on as soon as the operation or function
that caused it to turn off is finished.
• Auto Harmonize is enabled only when the Auto Accompani-
ment mode is FINGERED or CASIO CHORD.
E-33