Using Layer And Split Together - Casio CTK-671 User Manual

Casio musical instrument user's guide ctk-671

Hide thumbs Also See for CTK-671:

Midi implementation manual (23 pages)

Service manual (19 pages)

Service manual (18 pages)

Table Of Contents

Table of Contents

SPLIT

Split Tone

Main Tone (STRINGS)

(PIZZICATO

STRINGS)

Split point

To split the keyboard

First select the main tone.

Example: To select "050 STRINGS" as the main tone,

press the TONE button and then use the num-

ber buttons to input 0, 5 and then 0.

S t r i n

Press the SPLIT button.

Selected split tone

A c o . B a s s

Select the split tone.

Example: To select "048 PIZZICATO STRINGS" as the

split tone, use the number buttons to input 0,

4 and then 8.

P i z z . S t r

E-60

SPLIT

Specify the split point. While holding down the

SPLIT button, press the keyboard key where you

want the leftmost key of the high end range to be.

Example: To specify G3 as the split point, press the G3

Now try playing something on the keyboard.

• Every key from F 3 and below is assigned the PIZZI-

CATO STRINGS tone, while every key from G3 and

above is assigned the STRINGS tone.

Press the SPLIT button again to unsplit the key-

board and return it to normal.

NOTE

• The main tone sounds over Channel 1, while the split tone

sounds over Channel 3. You can also use the Mixer to change

the tone and volume settings for these channels.

• Split cannot be used while standing by for recording or while

recording is being performed in the Memory Mode.

Lit

• When the MODE switch is set to CASIO CHORD or FINGERED,

the accompaniment keyboard range is in accordance with the

split point you specify with the above procedure.