Specifications - Canon LV-CL15 Installation Manual

Adjustment of the Projection Angle
■ Fine Adjustment
Loosen the same screws that were used in the distortion adjustment and finely
adjust the angle so that the projected image fits the screen, then tighten all the
screws (i.e., a total of 14 including the inclination axis screws).
After the adjustments, check that the ceiling-mounting hanger
and the projector are fixed securely.

Specifications

Product Name:
Model:
Adjustment angle:
Dimensions:
Weight:
Supplied Items:
Specifications and appearance are subject to change without notice.
Ceiling-mounting hanger
LV-CL15
Up-down angle +/−10°
Left-right angle +/−10°
Inclination angle +/−10°
327 (W) × 166 (D) × 88 (H) mm
(when assembled, not including protruding parts)
Approximately 1.3 kg
Fixed ceiling part............................................... 1
Projector mounting adapter .............................. 1
Projector mounting screws (M4) ....................... 3
Up-down angle adjustment screws (M5) . .......... 4
Anti-fall wires .................................................... 2
Installation manual ............................................ 1
ENG-16