Table of Contents
Advertisement
Available languages
Available languages
3
Suspend the Projector from the Fixed Ceiling Part
Slide the slotted part of the projector mounting adapter over the pin of the fixed ceiling part
and push all the way to the back.
The projector is temporarily suspended in this condition and attention must be paid so that
the unit does not fall since it is not fixed in place.
Pin of fixed ceiling
part
4
Temporarily Fasten the Projector Mounting Adapter
Temporarily fasten by partially tightening the four supplied (M5) screws.
Tighten firmly after completing the screen projection angle adjustment.
Slotted part of mounting adapter
Temporarily fasten the
other side too.
ENG-11
Mounting the Projector
Advertisement
Chapters
Table of Contents
