Installation Precautions - Canon LV-CL15 Installation Manual

CAUTION
• Do not obstruct the projector's ventila-
tion holes. Doing so will prevent the dis-
sipation of heat and may result in fires. In
particular, do not use the projector in the
following ways:
Do not install the projector in a wall or in a
tight place where ventilation is poor, place
a cover it, etc.
• Do not install the projector in front of the
outlets of an air conditioner or heater or in
a place where vibrations are strong.
Doing so may result in fires.
• Do not install the projector in humid or
dusty places or exposed to smoke or
steam (such as near cooking equipment
or humidifiers). Doing so may result in
fires.
• When installing the projector, leave suf-
ficient space between it and surrounding
objects. Failure to leave sufficient space
will prevent the dissipation of heat and
may result in fires.
• When cabling, do not obstruct the projec-
tor's ventilation holes with cables. Doing
so will prevent the dissipation of heat and
may result in failure of the projector.
• When removing the screws on left and
right on the mounting adapter, be sure
to support the projector while doing so.
Failing to do so may result in the projec-
tor swinging back abruptly and causing
injury.
• for PLUGGABLE EQUIPMENT, the sock-
et-outlet shall be installed near the equip-
ment and shall be easily accessible.

Installation Precautions

• Special techniques are required for the
installation work of the projector and
installation work should only be under-
taken by qualified and licensed installers.
• Canon will not accept any responsibil-
ity related to any accidents or incidents
due to insufficient or inferior mounting
techniques.
Installation Location
Avoid places of high temperature or low
temperature.
Ambient operating temperature : 5°C to
40°C. (Quiet mode selected automatically
at 35°C to 40°C)
Avoid places exposed to direct sunlight and
the vicinity of ventilation holes of room air
conditioning and heating.
Avoid rooms with a lot of dust, humidity,
greasy smoke, or tobacco smoke.
Dirt will adhere to optical parts such as
lenses and mirrors and this will cause a
deterioration of image quality.
Avoid places in which the screen is exposed
to direct sunlight or illumination light.
When surrounding light directly hits the
screen, the image appears washed out and
is difficult to view.
ENG-3
Heed the Following