Table of Contents
Advertisement
Available languages
Available languages
2
Adjust the Up-Down Angle
Turn the projector up and down so that the left and right edges of the screen are parallel,
then firmly tighten the four up-down angle adjustment screws. It is acceptable if the image
extends beyond the screen.
Left and right edges
3
Adjust the Inclination
Adjust so that the image is projected to the screen without being slanted, then firmly tighten
the four inclination adjustment screws. Lastly, tighten the two inclination axis screws if they
are loose.
If the adjustment does not work out, readjust from Step
Maximum adjustment
angle +/−10°
10°
10°
Maximum adjustment
angle +/−10°
ENG-15
Adjustment of the Projection Angle
10°
10°
Up-down angle adjustment screws
(There are also screws on the oppo-
site side.)
Inclination axis screw
Inclination adjustment screws
(There are also screws on the oppo-
site side.)
1
.
Advertisement
Chapters
Table of Contents
