Yamaha RM Series Manual page 4

SITE SURVEY
Before installing the products, use the SITE SURVEY function in RM-WAP Device Manager to measure the signal in the area.
With the SITE SURVEY function, you can check the number of microphones that can be used in the measured area.
The SITE SURVEY function is available via [TOOLS][SITE SURVEY] (Page 33).
IMPORTANT: If radio frequency interference occurs, there may be no sound from the microphones or the microphone connection
may be unexpectedly cut. We recommend thoroughly examining the environment before installation.
AUTO SETUP
After products have been installed, their settings can be specified.
With the AUTO SETUP function, product settings can be specified using the wizard.
IMPORTANT: • For details on mounting the access point to the wall or ceiling, read the RM-WAP Owner's Manual.
• RM-WCH is required in order to use the AUTO SETUP function. Even in an environment where the AUTO SETUP
function cannot be used, RM-WAP Device Manager can be used to manually specify settings. (Page 19)
1.
Click the [AUTO SETUP] button.
The wizard starts up.
RM Series Wireless Microphone System Reference Manual
4