Yamaha Revolabs Executive Elite 01-ELITEEXEC8 Room Control Api Manual
Hide thumbs
Also See for Revolabs Executive Elite 01-ELITEEXEC8:
- Installation and operation manual (104 pages)
Related Manuals for Yamaha Revolabs Executive Elite 01-ELITEEXEC8
Summary of Contents for Yamaha Revolabs Executive Elite 01-ELITEEXEC8
- Page 1 Revolabs Executive Elite™ Wireless Microphone System Room Control API Guide Models: 01-ELITEEXEC8 03-ELITEEXEC4-EU 03-ELITEEXEC8-JP 01-ELITEEXEC4 03-ELITEEXEC8-TW 03-ELITEEXEC4-JP 03-ELITEEXEC8-EU 03-ELITEEXEC4-TW...
- Page 2 © YAMAHA UNIFIED COMMUNICATIONS INC. All rights reserved. No part of this document may be reproduced in any form or by any means without express written permission from Yamaha Unified Communications, Inc. Product specifications are subject to change without notice.
-
Page 3: Table Of Contents
Contents Using an Executive Elite with a Control System ................4 Serial Command & Return Strings ....................5 Channel Number: ..........................6 Examples: .............................. 6 Legacy Command Strings ......................... 6 Command String Tables: ........................7 Legacy Command Tables:........................12... -
Page 4: Using An Executive Elite With A Control System
Using an Executive Elite with a Control System The Executive Elite Base DSP can be monitored and controlled via an external control system. Communication can either be over the serial port of the Executive Elite, or over an IP connection. If several Executive Elite Base DSPs are part of an installation, each requires its own connection to the control system in order to communicate. -
Page 5: Serial Command & Return Strings
connection. Client mode in the executive Elite is persistent, meaning that if the server goes down or the connection is lost for any reason, the Executive Elite will periodically ping the server until the connection is re-established, without requiring a reboot. If the Executive Elite is the server, only one device can login at a time. -
Page 6: Channel Number
Channel Number: The options for the <Channel Number> portion of the serial strings are 1-8 for an Executive Elite 8, and 1-4 for an Executive Elite 4 system, since each Base station can only control up to 8 or 4 microphones, respectively. The <Channel Number> corresponds to the channel number the microphone is paired to in the Executive Elite. -
Page 7: Command String Tables
Command String Tables: Property/Action Command Format Description Response addmictogroup addmictogroup ch <channel Add the given mic into the designated group. addmictogroup ch <channel number> <group name> number> <group name> antennafwversion get antennafwversion Retrieve antenna firmware version. val antennafwversion <version> antennalinkstatus get antennalinkstatus Retrieve the antenna link status, val antennalinkstatus <0/1>... - Page 8 Property/Action Command Format Description Response 23 - Costa Rica, 24 - Venezuela, 25 - Middle East create mutegroup create mutegroup <new Create a new mute group. create mutegroup <new group name> group name> currentipaddress get currentipaddress Retrieve current IP address. val currentipaddress <ip address>...
- Page 9 Property/Action Command Format Description Response logmask set logmask <0/1/2/3> Configure the debug log level, minimum severity, val logmask <0/1/2/3> 0 - debug, 1 - warning, 2 - error, 3 - off. lopassfilter set lopassfilter ch <channel Configure the low pass filter value for a given val lopassfilter ch <chanel number>...
-
Page 10: Push To Talk
Property/Action Command Format Description Response pushtotalk get pushtotalk <group name> Retrieve group push to talk setting value, val pushtotalk <group name> 1 - push to talk set, 0 - not set. <0/1> pushtotalk set pushtotalk <group name> Configure group push to talk setting, val pushtotalk <group name>... - Page 11 The command ‘regnotify’ listed above will turn on notifications. The following table lists the notifications sent by the system. Notifications Notification Format Description mute_group_change notify mute_group_change <group name> Notify client that changes that affect a given group <action> have occurred. Actions include 'add' - add, 'del' - delete, 'ren' - rename.
-
Page 12: Legacy Command Tables
Notifications Notification Format Description status_change_antenna_link notify status_change_antenna_link <status> Notify client antenna link status changed, 0 - unlinked, 1 - linked. status_change_battery notify status_change_battery ch<channel Notify client the given microphone's battery status number> <percentage> changes. status_change_mic notify status_change_mic ch<channel Notify client the given microphone's status changed, number>... - Page 13 Channel pairing status; 0 - Inactive, 1 – Active type val type… Mic type; 1 - Lapel (Wearable), 2 - Omnidirrectional Tabletop, 3 - Directional Tabletop, 4 - XLR Adapter, 5 - Countryman Adapter MN-ELITE-ROOM-CONTROL-API-GUIDE-20180502-EN Copyright 2018 Yamaha Unified Communications, Inc.