Yamaha RM Series Manual page 23

[SETTINGS]
[ADMIN]
1
3
1 [Password Settings]
Allows you to check/change the password for logging in to RM-WAP Device Manager.
2 [Security Settings]
Allows you to select whether to enable remote control. For details on remote control, refer to the RM Series Remote Control Protocol
Specifications.
IMPORTANT: Remote control must be enabled for the access point to link to the RM-CR signal processor.
3 [Deployment Server Settings]
By using a deployment server, the device configuration file can be automatically acquired and applied to the device.
- [Enable Deployment Server]:
Allows you to select whether to use a deployment server.
- [Enable Automatic Server Discovery]:
Allows you to select whether to use the automatic discovery feature of the deployment server.
- [Primary Server], [Secondery Server]:
Specify the IP address of the deployment server when [Enable Automatic Server Discovery] is off.
- [Provisioning Internval]:
Allows you specify the deployment server provisioning interval.
4 [Syslog Settings]
Allows you to select whether to use a syslog server.
RM Series Wireless Microphone System Reference Manual
23
2
4