Yamaha RM Series Manual page 15

2
Battery button
3 Battery indicator
Condition
Charging the unit
Charging the unit
Charging the unit
Charging the unit
Battery button pressed
Battery button pressed
Battery button pressed
(Continuing to use the unit without charging)
Battery button long-pressed for 2 to 3
seconds
IMPORTANT: The microphone is pre-installed with an RM-WBT battery. In order to maintain battery capacity, charge the
microphone (battery) once every six months.
NOTE: • Power consumption can be reduced by putting the microphone in standby mode.
• Putting the microphone in standby mode cuts the DECT connection with the access point. When the standby mode
is exited (by long-pressing the Battery button again for 2 to 3 seconds), the connection is re-established.
[Bottom panel]
1 PAIR button
Condition
PAIR button long-pressed for at least 2 seconds
PAIR button long-pressed for at least 2 seconds
PAIR button long-pressed for at least 2 seconds
Battery indicator
Lit green
Lit orange
Lit red
Unlit
Lit green for two seconds
Lit orange for two seconds
Lit red for two seconds
Flashes red
Flashes orange slowly
Mic indicator
Flashes blue quickly
(After flashing blue quickly)
Flashes blue twice
(After flashing blue quickly)
Flashes red twice
RM Series Wireless Microphone System Reference Manual
15
Unit status
Charging (available operating time of 15 hours or more)
Charging (available operating time of 3 hours to less
than 15 hours)
Charging (available operating time of less than 3 hours)
Charging finished
Remaining operating time of 15 hours or more
Remaining operating time of 3 hours to less than 15
hours
Remaining operating time of less than 3 hours
Remaining operating time of less than 1 hour
Enters standby mode
1
Waiting for pairing/Pairing
Paired successfully
Pairing failed
Unit status