Yamaha RM Series Manual page 31

[NETWORK]
1
1 [IP Address Settings]
Allows you to select whether to use DHCP. When set to use DHCP, the IP address is specified in Auto IP mode if there is no DHCP
server.
If settings have been incorrectly specified, press the Reset button on the front of the RM-WAP to reset the network-related settings.
2 [AP Name Settings]
Allows you to select whether to specify the name of the access point automatically or manually. For [UNIT ID], enter single-byte
hexadecimal characters.
RM Series Wireless Microphone System Reference Manual
31
2