Epson WorkForce Pro WF-M5190DW User Manual page 22

User's Guide
Menu Settings and Explanations
Common Paper Size
Settings
Paper Type
Orientation
Quality
Ink Save Mode
Print Order
Number of
Copies
Binding Margin
Auto Paper
Ejection
2-Sided Printing
PCL Menu Font Source
Font Number
Pitch
Height
Symbol Set
Form
CR Function
LF Function
Paper Source
Assign
Printer Basics
Select the paper size.
Select the paper type.
Select the printing direction.
Select the print quality.
Conserves ink by reducing the print density.
Last Page on Top: Prints from the irst page of a ile.
First Page on Top: Prints from the last page of a ile.
Set the number of copies.
Select the binding position.
Ejects paper automatically when printing is stopped during a print job.
Performs 2-sided printing.
Resident: Select to use a preinstalled font on the printer.
Download: Select to use a font you have downloaded.
Select the default font number for the default font source. The available number
varies depending on the settings you made.
Set the default font pitch if the font is scalable and of ixed-pitch. You can select from
0.44 to 99.99 cpi (characters per inch), in 0.01 increments.
This item may not appear depending on the font source or font number settings.
Set the default font height if the font is scalable and proportional. You can select
from 4.00 to 999.75 points, in 0.25 increments.
This item may not appear depending on the font source or font number settings.
Select the default symbol set. If the font that you selected in the font source and the
font number setting is not available in the new symbol set setting, the font source
and the font number settings are automatically replaced with the default value, IBM-
US.
Set the number of lines for the selected paper size and orientation. This also causes a
line spacing (VMI) change, and the new VMI value is stored in the printer. This means
that later changes in the page size or orientation settings cause changes in the Form
value based on the stored VMI.
Select the line feed command when printing with a driver from a speciic operating
system.
Set the assignment for the paper source select command. When 4 selected, the
commands are set as compatible with the HP LaserJet 4. When 4K is selected, the
commands are set as compatible with the HP LaserJet 4000, 5000, and 8000. When
5S is selected, the commands are set as compatible with the HP LaserJet 5S.
22