Table of Contents
Advertisement
LOCAL PASSCODE
Default:
• Lock is set with a preprogrammed default local passcode. Strongly suggested
to change default password to a unique owner passcode.
• Default Passcode:
Changing Local Passcode
• Remove battery cover from back module.
• Press and release the S button found just
below battery tray.
• Enter a 4-8 digit code using the keypad.
• Then press and release the "
• 2 beeps: Successfully saved.
3 beeps: Error, Try again.
0 beeps: Refer to troubleshooting.
12345678
" button.
S Button
C S 1 2
13
Advertisement
Table of Contents
Need help?
Do you have a question about the Smart Lock M1 and is the answer not in the manual?