Table of Contents
Advertisement
2
1
3
4
Figure 30
1. Discharge tube, curved
end
2. Opening in bagger top
3. Discharge tube, flared end
2. Slide the flared end of the discharge tube over
the end of the chute. Move the rubber retaining
strap on the chute snaps over the peg on the
discharge tube to secure it
G010641
5
g010641
4. Peg
5. Rubber strap
(Figure
30).
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Note:
Overall width of unit with bagger: 58.7 inches
(149 cm).
WARNING
To avoid personal injury, follow these
procedures:
• Become familiar with all operating and
safety instructions in the Operator's
Manual for the mower before using this
attachment.
• Never remove the discharge tube, bags,
bagger top, or the chute while the engine
is running.
• Always shut the engine off and wait for all
moving parts to stop before clearing an
obstruction from the bagging system.
• Never do maintenance or repairs while the
engine is running.
WARNING
Without the grass deflector, bagger tubes or
complete bagger assembly mounted in place,
you and others are exposed to blade contact
and thrown debris. Contact with the rotating
mower blade(s) and thrown debris will cause
injury or death.
• Always install the grass deflector when
removing the bagger and changing to side
discharge mode.
• If the grass deflector is ever damaged,
replace it immediately. The grass deflector
routes material down toward the turf.
• Never put your hands or feet under the
mower.
• Never try to clear the discharge area or
mower blades unless you move the power
take off (PTO) to off and rotate the ignition
key to off. Also remove the key and pull
the wire off of the spark plug(s).
• Turn off the engine before unclogging the
discharge chute.
Emptying the Grass Bags
Be careful when lifting or handling a grass bag that is
full. To empty the grass bags:
17
Advertisement
Table of Contents
