Carrier 40RM007-034 Installation, Start-Up And Service Instructions Manual page 12

40RM – Commercial Packaged
Air Handler
Cooling Coil
– – Direct Expansion
Q – Direct Expansion for Heat Pump Duty
S – Chilled Water
Nominal Capacity – Tons (kW)
007 – 6 (21) 016 – 15 (52)
008 – 7-1/2 (26) 024 – 20 (70)
010 – 8-1/2 (29) 028 – 25 (87)
012 – 10 (35) 034 – 30 (105)
014 – 12-1/2 (43)
Not Used
Expansion Device
– – None (40RMS)
B – Thermostatic Expansion Valves (40RM, 40RMQ)
H – TXV with High Capacity, 4 Row Coil
Voltage Designation (V-Ph-Hz)
1 – 575-3-60
3 – 208/230-1-60
(007-010 sizes only)
5 – 208/230-3-60
6 – 208/230/460-3-60 (all sizes 007-014;
size 016 except YC and WD options)
460-3-60 (sizes 016 with YC or WD options
and all size 024-034 units)
LEGEND
TXV — Thermostat Expansion Valve
*YC and WD option codes for all 034 size units and 008, 010 size units with 208/230-1-60
power designate standard motor and high-static drive.
NOTE: See the following table for the sizes available for each unit.
UNIT 007 008 010
40RM X X
40RMQ X
40RMS X
LEGEND
TXV — Thermostatic Expansion Valve
40RM –
8 – 230-3-50
9 – 400-3-50
012 014 016
X X X
X X
X X X X
Fig. 2 — Model Number Nomenclature
Fig. 3 — Foam Block Location
016 – – B 5 0 1 GC
024 028 034
X X X
X X
X X X
12
Factory-Installed Options
GC – Unpainted, Standard Motor,
and Standard Drive
HC – Unpainted, Standard Motor,
and Medium-Static Drive
(Not available for 60 Hz 028 size
or 50 Hz 016-028 sizes)
TC – Unpainted, Alternate Motor,
and Medium-Static Drive
(60 Hz 028 size and
50 Hz 016-028 sizes)
YC – Unpainted, Alternate Motor, and
High-Static Drive*
ED – Painted, Standard Motor, and
Standard Drive
FD – Painted, Standard Motor, and
Medium-Static Drive
(Not available for 60 Hz 028 size
or 50 Hz 016-028 sizes)
RD – Painted, Alternate Motor, and
Medium-Static Drive
(60 Hz 028 size and
50 Hz 016-028 sizes)
WD – Painted, Alternate Motor,
and High-Static Drive*
Packaging
1 – Standard Domestic
3 – Standard Export
Revision Number
0 – Original