Gateway MX3311 Hardware Replacement Manual page 5

9 Remove the four screws that secure the hard drive
to the hard drive bracket.
Screw
Screw
10 Remove the bracket from the old drive.
Technical Support
See the label on the bottom of the notebook for Customer
Care Information. See your hardware guide for important
safety, regulatory, and legal information.
2
Screw
Screw
www.gateway.com
Replacing the Hard Drive Kit
11 Place the new drive, label side up, onto the bracket
so the screw holes line up.
12 Replace the screws that secure the bracket to the
drive.
13 Slide the new hard drive kit into your notebook,
then replace the screws that secure the hard drive kit
to the notebook.
14 Insert the battery and turn your notebook over.
15 Connect the power adapter, modem cable, and
network cable.
16 Turn on your notebook.
17 If the hard drive was sent to you from Gateway with
the operating system, applications, and drivers
installed, you will see the Windows startup screen.
Go to Step 19.
-OR-
If you see a blank screen, restart your notebook, then
F11
press while your computer is starting.
18 Insert the Operating System Recovery CD/DVD when
prompted, then follow the on-screen instructions.
19 Reconnect all peripheral devices and replace any
Express cards.
© 2006 Gateway, Inc. All rights reserved. Gateway and
eMachines are trademarks or registered trademarks of
Gateway, Inc. in the United States and other countries.
All other brands and product names are trademarks or
registered trademarks of their respective companies.