Protecting From Power Source Problems - Gateway M460 User Manual

Chapter 3: Getting Started
3
Plug the power cord into a wall outlet.
The power indicator turns on (see
of the power indicator). If the power indicator does not turn on,
unplug the adapter from your notebook, then plug it back in.
4
When you finish using your notebook for the first time, turn off your
notebook and leave your notebook connected to AC power until the
battery charge indicator turns blue.
Warning
Important

Protecting from power source problems

During a power surge, the voltage level of electricity coming into your
notebook can increase to far above normal levels and cause data loss or
system damage. Protect your notebook and peripheral devices by
connecting them to a surge protector, which absorbs voltage surges and
prevents them from reaching your notebook.
Warning
24
"Front" on page 10
Do not attempt to disassemble the AC adapter. The
AC adapter has no user-replaceable or user-serviceable
parts inside. The AC adapter has dangerous voltages that
can cause serious injury or death. Contact Gateway about
returning defective AC adapters.
If the battery charge indicator does not turn blue after
three hours, contact Gateway Customer Care at
support.gateway.com.
High voltages can enter your notebook through both the
power cord and the modem connection. To protect your
notebook and avoid electrical shock, use a surge protector.
If you have a telephone modem, use a surge protector that
has a modem jack. If you have a cable modem, use a surge
protector that has an antenna/cable TV jack. During an
electrical storm, unplug both the surge protector and the
modem.
www.gateway.com
for the location