Configuring For Macos (10.14 Or Later) - Antelope DISCRETE 8 PRO User Manual

Configuring for macOS (10.14 or later)

The new security settings introduced in macOS Mojave 10.14 (and later releases) may
result in no input signal reaching your DAW, despite having everything set up correctly.
These steps apply when you are using the Discrete 8 Synergy Core in a DAW for the first
time:
1. Launch your DAW and choose Discrete 8 Pro Synergy Core as the input device. The
following dialog box will appear (if using Ableton Live 10 Suite, for example):
3. Click 'OK' and your DAW should function normally.
However, if the events above did not occur for some reason, or you are using multiple
DAWs, you must do a manual tweak for each in 'Security & Privacy' settings:
1. Open the 'Apple' menu from the top-left of the menu bar and choose 'System
Preferences'. Head to the 'Security & Privacy' settings menu.
2. Click the 'Privacy' tab. In the column on the left, choose 'Microphone'. Make sure
there's a checkmark next to any DAW you want to use:
Discrete 8 Pro Synergy Core User Manual
Page 11