Foppapedretti FP360 Assembly Instructions Manual page 73

INSTALLING THE CAR SEAT IN THE VEHICLE
Installing the car seat in Group 2/3 for children weighing between 15 and 36 kg,
with the 3-point seat belt
It is recommended that you use the 5-point harness for as long as possible. Remove the
reducer to use the car seat in the GROUP 1 configuration for a longer time.
When your child has outgrown the group 1 (9-18kg) configuration and you wish to use
the seat for a child in either group 2 (15 - 25kg) or group 3 (22-36kg) then you will need
to remove the child car seats integral 5-point harness. See paragraph "Remove the
5-point harness".
Installation with the vehicle 3-point seat belt
Only suitable for use in vehicles equipped with 3-point static or retractor seat belts,
approved according to regulation UN/ ECE no.16 or other equivalent standards.
• ENGLISH •
Place the car seat on the car's seat. Adjust the
D1
D1
seat inclination to position 1 only. The use of other
inclinations is not allowed. Push the car seat against
the backrest of the passenger seat. There must not be
any space between the backrest of the passenger seat
Inclination angle
Inclination angle
D5 D6
D5 D6
and the car seat (D2).
1
D7
73
D 2
D
2
3
2
2