Foppapedretti FP360 Assembly Instructions Manual page 57

Gr. 2/3
Gr. 0+/1
Using the buckle
①
Unlocking the ISOFIX system and Top Tether
①
USING THE CAR SEAT
NOTES: At each use, check that the headrest and harness
are correctly adjusted.
NOTES: When the red line exceeds the height of the car
seat shell, the car seat must be used in the Group 2 or
3 installation.
To attach the buckle: Hold together the central buckle
tabs (fig. 1-2) and insert them in the special slot inside the
harness buckle. A "click" will indicate that it has attached
correctly (fig. 3).
NOTE: to attach the buckle, it is necessary to insert both
B 4
tabs.
PU SH
To release the buckle: Press the red button to remove the
tabs from the central buckle (fig. 4-5).
B5
②
• ENGLISH •
②
Releasing the Top Tether
Press the button and raise or lower the headrest,
adjusting it according to the child's height.
In group 1, the adjustment of the headrest also
changes the height of the shoulder straps.
57
③
③
B7
B8
PULL
B9