Foppapedretti FP360 Assembly Instructions Manual page 58

• ENGLISH •
USING THE CAR SEAT
Unlocking the ISOFIX system
① ③
②
Press both sides of the button simultaneously, the ISOFIX indicator will turn red (fig.
1). Repeat this process on both ISOFIX release buttons. Once the ISOFIX connectors
have been released, slide the connectors along the car seat shell to retract them (fig. 2).
Removing the car seat (fig.3).
Adjusting the seat belt (harness)
To loosen the harnes: Press the adjustment button and at the same time grip the
straps (chest belts) at the bottom, under the pads of the chest protectors, and pull them
forwards to loosen them.
IMPORTANT: Do not pull on the shoulder pads.
Tightening the harness: Pull the harness adjustment strap so as to tighten it properly
against the body of the child. The harness is correctly tightened when the gap between
the harness and the child is no greater than the thickness of your finger (1 cm).
NOTE: check that the buckle is secured by tugging the shoulder and waist straps.
ATTENTION: Do not twist or overlap the harness straps.
58