Installation In The Vehicle Without Base - Foppapedretti MYO CS28 Manual

INSTALLATION IN THE VEHICLE WITHOUT
BASE
Place the child restraint rear-facing on
the,vehicle seat and make sure the handles
in specified position The child will face the
rear of the vehicle.
7a
Route the vehicle lap belt through both lap
belt guides and buckle the seat belt.
7b
Route thevehicle shoulder belt around the
back of the child restraint and through the
shoulder belt guide.
7c
If vehicle shoulder belt is too short, please
move vehicle seat belt height adjustment
to the lowest possible height. If the vehicle
belt is still too short, try another seating
position.
7d
GB
CS28