Gateway M-1412 Reference Manual page 122

14
15
16
17
18
19
20
21
22
23
114
CHAPTER 8: Upgrading Your Notebook
Remove the bracket from the old drive.
Place the new drive, label side up, onto the bracket so
the screw holes line up.
Replace the screws that secure the bracket to the drive.
Slide the new hard drive kit into your notebook, then
replace the screws that secure the hard drive kit to the
notebook.
Replace the hard drive bay cover, then tighten the cover
screws.
Insert the battery, then turn your notebook over.
Connect the power adapter, modem cable, and network
cable
Turn on your notebook, open the DVD drive, insert the
Windows DVD, close the DVD drive, then restart your
notebook.
When the prompt "Press any key to boot from CD or DVD"
appears, press any key on your keyboard and follow the
on-screen instructions. As part of the process you may
be prompted to insert your Drivers and Applications
Recovery disc.
Reconnect all peripheral devices and replace any
Express cards.