Wet Vacuuming; Blow Function; Filter Cleaning Button; Cleaning/Maintenance - Parkside PWD 25 A2 Translation Of The Original Instructions

Wet & dry vacuum cleaner
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 17
2. Pull the fabric filter bag over the filter
basket.
Vacuuming fine dust:
Specific suction processes (e.g. grinding
of paints and lacquers, milling or drilling
walls, grinding or drilling hard wood) can
pose a risk from hazardous dust.
We recommend using the following option-
al filter combination, which is available,
for fine dust (see "Spare parts/Accesso-
ries"):
1. Fluted filter (20)
2. Fine dust filter bag made of fleece
(optionally available see "Replacement
parts/Accessories"), which is used in
stead of the paper filter bag (21) in-
cluded in the scope of delivery.

Wet vacuuming

1. For wet vacuuming or to vacuum water,
fit the foam filter (18) to the filter basket
(25) on the motor head (2).
To avoid tearing the foam filter (18):
- Use only a dry filter;
- Before inserting, twist the edge of
the filter slightly and then roll it back.
2. Suctioning up (draining) water: place
the suction hose (
dle (
17) into the water tank and
suction up the water.
3. Empty the stainless steel container
immediately after suction cleaning be-
cause it is not designed to store liquids
(see „Cleaning/Maintenance").
Never reach into the water to
be suctioned up. Danger of
electric shock.
16) on the han-
When the container (
the suction opening is shut off by
a float, and suction is then cut off.
Switch the appliance off, remove
the plug from the socket and empty
the container (see "Cleaning/Main-
tenance").
If foam or liquid exits, switch off the
machine immediately.

Blow function

Operation without the use of a filter
is recommended.
• Connect the suction hose (16) to the
connecting blower (12) on the motor
head (2).

Filter cleaning button

Insert the mains plug of the device
and turn the device on.
If the suction power decreases, you can
improve it by pressing the filter cleaning
button (
26).
1. Turn the device on.
2. Close the suction opening of the suc-
tion hose by hand.
3. Press the filter cleaning button (

Cleaning/Maintenance

Pull out the mains plug.
Danger of electric shock.
Always check the appliance before
use for any obvious faults such as
a defective mains cable, and have
these repaired or replaced.
GB
IE
5) is full,
26).
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

367468 2101

Table of Contents