Related Manuals for Pyle PYWM78
Summary of Contents for Pyle PYWM78
- Page 1 PYWM78 TV Wall Mount Bracket Fits for 42-84'' LED/LCD/OLED & Plasma Flat Screen TV with 2x Standard Weight Support, Weight Up to 132lbs.
-
Page 2: Part List
CAUTION: Please read this instruction carefully before assembly. • Fits for 42-84" plasma and LCD TV. • Weight Capacity: 60Kg (132Lbs).. CAUTION: SAFETY WARNING: • Never let children climb on product or play with product. • Do not sit or stand on product. •... -
Page 3: Wall Mounting Hardware
WALL MOUNTING HARDWARE TV MOUNTING HARDWARE Step 1: Remove the plaster board on the surface of concrete wall when assembling mount on the concrete wall. Hold Wall plate (A) against wall at desired position on concrete wall, then using a pencil mark 4 hole locations. Then drill holes according pencil marks using 3/8"... - Page 4 If you mount TV mount into wood studs, pre-drill the mark 4 holes using 7/32" drill bit to a depth of 2.5", x Wall plate (A) to the wall with lag bolt and washers (Figure 2) CAUTION: The wood stud min size is 2x4 inches, and surface covering can't more than 5/8 inches.
- Page 5 Step 2: Attach TV Bracket (B\C) to the back of TV, choose corresponding bolt, washer and spacer to x the holes of TV rear. (Figure 3) If the back of TV is not at, or the bolts used to assemble TV are too long, or there is interfere between TV bracket and cable inlets, we highly recommend you to use spacers.
- Page 6 Step 3: Hang the pre-assembled TV unit on the Wall Plate. Pull down to release the safety catch on both Brackets to attach the assembly to the bottom part of the Wall Plate. (Figure 4) CAUTION: This step must require 2 or more professional to nish. Pull down Figure 4 Step 4: Adjust angle by loosening the side screws to allow the Brackets to tilt...
-
Page 7: Product Dimensions
PRODUCT DIMENSIONS: PAY EXTRA CARE AND ATTENTION WHEN YOU FASTEN TWO TV MOUNTS TO THE BACK PANEL OF TV IN STEP 2. MAKE SURE THE APPROPRIATE MOUNT HARDWARE IS BEING USED PROPERLY. 1. Select correct Mounting Hardware according to the screw hole size of your TV, discard any remaining screws or spacers. - Page 8 PYWM78 TV Wall Mount Bracket Fits for 42-84'' LED/LCD/OLED & Plasma Flat Screen TV with 2x Standard Weight Support, Weight Up to 132lbs. Features: • Fits for 42'' to 84'' TV or Fits for 16’’/24’’ Studs Plus Concrete Wall •...
- Page 9 Technical Specs: • Mount Type: Large Tilt Mount • TV Size: 42''- 84'' • Fitting Studs Spacing: Up to 24'' • Max VESA: 23.62'' x 15.75'' -inches • Weight Capacity: 132 lbs. (60 Kg.) • Tilt angle: 0°~ -8° • Distance to Wall: 1.54'' -inches •...
- Page 10 Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.com...