Part 5-Adjusting display and using cord management
Part 5-Adjusting display and using cord management
Route cords along articulating arms using cord management
Articulating arms can be adjusted to position display into desired location.
Use 6x6 and 5x5 wrench to tighten and loosen the tension screw. Do not
overtighten and do not loosen to the point the screws come out.
Pyle Audio
1600 63rd st , Brooklyn, NY, 11204
(718)236-8000
Thank you for choosing our product
Thank you for choosing our product
This product contains small items that could be a choking hazard if swallowed. Keep
these items away from young children
1.Make sure these instructions are read and completely understood before attempting
installation. If you are unsure of any part of this installation, contact a professional
installer for assistance.
2.The wall or mounting surface must be capable of supporting the combined weight of
the mount and the display; otherwise the structure must be reinforced
3.Safety gear and proper tools must be used. A minimum of two people are required
for this installation. Failure to use safety gear can result in property damage, serious
injury or death.
-8-
s(5).
clip
6x6 wrench
5x5 wrench
±90°
±180°
±90°
Warning
!
.
INSTALLATION GUIDE
Item No.:PSW601AT
Item No.:PSW601AT
TV Size Range: 32
Maximum Weight Capacity: 60kg/132lbs
Adjustable angle: 5
Balance adjust system is included
CAUTION
This product was designed to be installed on wood stud walls and solid concrete walls.
Before installing make sure the supporting surface will support the combined load of the
equipment and hardware. Never exceed the Maximum Load Capacity. This product is
intended for indoor use only. Use of this product outdoors could lead to product failure or
personal injury.
"~
"
50
- ~
°
°
15
.
.
www pyleaudio com
MADE IN CHINA