Pyle PSWLE82 Installation Manual

Part 5-Adjusting display and using cord management Part 5-Adjusting display and using cord management
Route cords along articulating arms using cord management
Articulating arms can be adjusted to position display into desired location.
Use wrench(8) to tighten and loosen the tension screw. Do not overtighten
or overloosen to make the screws come out.
±180°
±180° ±180°
Wrench 4x4
Wrench 5x5
Thank you for choosing our product Thank you for choosing our product
Pyle Audio
1600 63rd st , Brooklyn, NY, 11204
(718)236-8000
This product contains small items that could be a choking hazard if swallowed. Keep
these items away from young children
1.Make sure these instructions are read and completely understood before attempting
installation. If you are unsure of any part of this installation, contact a professional
installer for assistance.
2.The wall or mounting surface must be capable of supporting the combined weight of
the mount and the display; otherwise the structure must be reinforced
3.Safety gear and proper tools must be used. A minimum of two people are required
for this installation. Failure to use safety gear can result in property damage, serious
injury or death.
-8-
s.
clip
±5°
Warning
!
.
°~ °
-5 15
This product was designed to be installed on wood stud walls and solid concrete walls.
Before installing make sure the supporting surface will support the combined load of the
equipment and hardware. Never exceed the Maximum Load Capacity. This product is
intended for indoor use only. Use of this product outdoors could lead to product failure or
personal injury.The depth of this mount(1.3 ) may not provide sufficient space for proper
ventilation on some screens. Please refer to the manufacturer's requirements for mounting
your screen befourinstallation.
INSTALLATION GUIDE
Item No.: PSWLE82 Item No.: PSWLE82
"～ "
TV Size Range: 37 55
Maximum Weight Capacity: 35kg/77lbs
VESA: 700X500
Safety automatic lock
Unlock cord
CAUTION
"
. .
www pyleaudio com