Pyle PWLB008 Installation Manual

Flat panel fixed mount

Enlarged version

Monitor Plate Attachment

If the monitor is VESA compliant, bolt the Monitor Plate directly to the monitor,

as described in Step 3.

If the monitor is not VESA compliant, bolt the Monitor Plate to the Adaptor

Plate (sold separately) using the following mounting pattern (fig. 6):

Caution:

Never force screws into the monitor, as damage may occur. NEVER

use an electric drill to secure screws.

Complete the installation as per Steps 4

Fig. 6

Caution :

This Product LCD /Plasma Wall Mount Bracket is

intended for use only with the maximum weights indicated .See apparatus

instructions .Use with products heavier than the maximum weights

indicated may result in instability causing possible injury .

-8-

Flat Panel Fixed Mount

INSTALLATION GUIDE

Item No.:PWLB008

TV size range 10

Universal VESA mount

Low profile: only

19mm

Easy to install: sliding plate operation

Max load capacity:25Kg/55lbs

IMPORTANT

IMPORTANT: If don't understand about right install ways, please

consult to normal installing specialist.

from wall

Table of Contents

Do you have a question about the PWLB008 and is the answer not in the manual?

Page 1 .See apparatus instructions .Use with products heavier than the maximum weights indicated may result in instability causing possible injury . Flat Panel Fixed Mount INSTALLATION GUIDE INSTALLATION GUIDE Item No.:PWLB008 Item No.:PWLB008 "- " TV size range 10 Universal VESA mount...
Page 2 Parts: Letter Description Monitor Plate Wall Plate Safety bolt M4X12 bolt M4X25 bolt M5X12 bolt M5X25 bolt M6X12 bolt M6X25 bolt M5 washer M6 washer " 9/16 spacer Long bolt Long bolt washer Wall anchor Optional Installations Optional Installations In addition to being used as a flat panel wall mount, the mount can also be used in conjunction with other products.
Page 3 Fig 4 Step 4 Step 4 Carefully position monitor so that Wall Plate and Monitor Plate are vertically aligned, with the bottom of Monitor plate overlapping the top of the Wall Plate. Gently lower monitor into position, sliding the two plates together until the Monitor Plate bottoms out against the Wall Plate.
Page 4 Step 2 Step 2 Wooden Stud Mounting Wooden Stud Mounting Using an electronic stud finder, locate the center of the wooden stud. Position the Wall Plate (2) in desired mounting location over stud. Level the Wall Plate, and then using the Wall Plate as a template, mark mounting hole locations over the center of the stud.