Inlet Hose Connection - BorMann BPW3000 User Manual

Picture 2

Inlet hose connection

1.Connecting water hose to inlet, make sure
it is connected firmly. Do not turn on the
machine at this moment.
2.Turn on the tap,make sure the inlet water
pressure keeps between 0.01Mpa and 0.3Mpa.
3.Pull the trigger till all the air is pushed out of
machine and water flows from the gun. It means
now pump is full of water.
4.Then you can turn on the switch.See picture
3
OPERATION
Gun operation
Spray angle can be adjusted.The spray angle can be varied from straight to fan by turning the
nozzle. See picture 4
Quick
Water
Picture