Display - Gateway 200ARC User Manual

Chapter 16: Troubleshooting
Try a different diskette. Occasionally diskettes are flawed and cannot be
read by the diskette drive.
You see a "Disk is full" error message
Delete unnecessary files on the diskette.
Try a different diskette. Occasionally diskettes are flawed and cannot be
read by the diskette drive.
Run Error checking on the diskette. For more information, see "Checking
the hard drive for errors" on page 213. If errors are detected and corrected,
try using the diskette again.
You see a "Non-system disk", "NTLDR is missing", or "Disk error"
error message
Eject the diskette from the diskette drive, then press E
Make sure that the diskette you are using is IBM-compatible.
The diskette drive status indicator is lit continuously
Remove the diskette from the drive. If the indicator stays on, try restarting
your notebook.

Display

The screen is too dark
Adjust the brightness using the system keys. For more information, see
"System key combinations" on page 26.
The screen resolution is not correct
Change the screen resolution from the Display Properties dialog box. For
more information, see "Adjusting the screen resolution" on page 168.
The text on the display is dim or difficult to read
Adjust the brightness and contrast using the system keys. For more
information, see "System key combinations" on page 26.
Change the display settings. For more information, see "Adjusting the
screen and desktop settings" on page 166.
Move your notebook away from sources of electrical interference, such as
televisions, unshielded speakers, microwaves, fluorescent lights, and metal
beams or shelves.
254 www.gateway.com
.
NTER