Gateway 200E Reference Manual page 108

12
13
14
15
16
17
18
100
CHAPTER 8: Upgrading Your Notebook
Remove the four screws that secure the hard drive to
the hard drive bay cover.
Screws
Remove the cover from the old drive.
Place the new drive, label side up, onto the cover so the
screw holes line up.
Replace the screws that secure the cover to the drive.
Slide the new hard drive kit into your notebook, then
replace the screws that secure the hard drive kit to the
notebook.
Insert the main and optional secondary batteries, then
turn your notebook over.
Connect to the optional port replicator.
-OR-
Connect the power adapter, modem cable, and network
cable
Screws