Removing The Keyboard - Gateway 200ARC Replacement Manual

Unplug the power cord and the modem and network cables.
Remove the battery. For more information, see "Changing batteries" in
your user's guide.
Disconnect all peripheral devices and remove any PC Cards.
Before working with notebook components, follow these guidelines:
Avoid static-causing surfaces such as carpeted floors, plastic, and packing
foam.
Remove components from their antistatic bags only when you are ready
to use them. Do not lay components on the outside of antistatic bags
because only the inside of the bags provide electrostatic protection.
Always hold components by their edges. Avoid touching the edge
connectors. Never slide components over any surface.

Removing the keyboard

To remove the keyboard:
1
Follow the instructions under "Preventing static electricity discharge" on
page 1.
2
Turn off your notebook.
3
Remove any PC Cards.
4
Disconnect the AC adapter and modem and network cables.
5
Disconnect the optional port replicator.
6
Turn your notebook over so the bottom is facing up.
7
Remove the battery.
2 www.gateway.com