Advertisement
Displays the current torque and peak torque output of the engine alongside a bar
illustrating the current output.
Zone4
Press anywhere in Zone 4 to reseVzero peak value.
Note: The parameters of this bar can be changed manually to accurately reflect
the maximum torque of the specific vehicle from ITC Settings -> Preferences ->
Gauge Settings -> Torque Bar Max.
Displays the current horsepower and peak horsepower of the engine alongside
a bar illustrating the current output.
Zones
Press anywhere in Zone 5 to reseVzero peak value.
Note: The parameters of this bar can be changed manually to accurately reflect
the maximum power of the specific vehicle from ITC Settings ·> Preferences
•> Gauge Settings •> Power Bar Max
1 . Move back one screen
4. Return to home screen
2. Erase saved information on screen (Press and Hold)
3. Begin recording current session
6 . Press to access each of the three memory banks.
• To store the information currently on screen to memory,
press and hold the desired bank number.
5 . Move forward one screen
• A double beep will sound to confirm that the selection has
been saved.
• The memory banks can also be accessed by navigating to
their specific pages: Memory 1, Memory 2 and Memory 3
7 . Current selected screen
- Acceleration
- Braking
COMPLETE PERFORMANCE SCREEN LIST (EXAMPLE SCREENS)
- Current (1/8 or 1/4 mile current measurement)
- Last (1/8 or 1/4 mile last measurement)
Rollout is part of the performance measurement system. When any timing is made
from stationary, Rollout is the distance the vehicle is allowed to move before
ROLLOUT
timing is started. It allows the ITC kit to give a measurement that is closer to what
would be measured at the drag strip. If Rollout is ON, the car is allowed to move
approximately 12 inches before timing is started. If Rollout is OFF, timing is started
as soon as the ITC kit detects any movement.
©2017 SCOSCHE INDUSTRIES, INC.
GAUGE MODE
PERFORMANCE MODE
- Best 1 /8
- Best 1/4
- Best Individual/Split
11
+-
Gauge Settings
Page 10 Cont'd
Gauge Set 2
Gauge Set 3
Torque Bar Max
e�m
Gauge Set 3
Torque Bar Max
Power Bar Max
S�ffi
FIGURES
- Memory 1
- Memory 2
- Memory 3
ITCGM01AB
x
➔
450 lbft
➔
I
450 lbft
➔
450 hp
06/19
Advertisement
