Summary of Contents for Noble House Home Furnishings Gazebo
Page 1
1. Select ideal location. Set out all parts on a clear and level surface prior to assembly. Ideally, the Gazebo should be set up in the desired location to avoid moving it after assembly. 2. Team Work. We recommend 4-5 adults and it may require 2 to 3 hours to fully assemble the Gazebo.
Left short beam Right short beam Left long beam Right long beam Post Upper beam connector Lower beam connector Short mosquito net tube Long mosquito net tube Connecting flat iron Central device Noble house Home Furnishings LLC 2 oF 13...
Page 3
Small Canopy Large Canopy Curtain Mosquito Net Hardware Picture Description Label M6*15 ① M6*60 ② M6*72 ③ Hanging Ring ④ Wrench ⑤ Stake ⑥ ⑦ Plastic gasket Noble house Home Furnishings LLC 3 oF 13...
Curtain (L) Mosquito Net (M) This Gazebo has multiple parts and may require up to 3 hours to assemble.To give you an overview of the Gazebo parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Page 6
Insert the mosquito net tube (G/G1) into the upper beam connector (F1) as shown in Fig. 2. Connect the mosquito net tube (G/G1) and the beam (D1/D2/D3/D4) with the Bolt ② and Plastic Gaskets ⑦, as shown in Fig. 3. Noble house Home Furnishings LLC 6 oF 13...
Page 7
Connect the beam (D3/D4) and the post (E) with the Bolts ①, as shown in Fig. 4. Connect the beam (D3/D4) and the post (E) with the Bolts ① and the Connecting Flat Iron (H), as shown in Fig. 5. Noble house Home Furnishings LLC 7 oF 13...
Page 8
Connect the beam (D1/D2) and the post (E) with the Bolts ①, as shown in Figure 6. Connect the beam (D1/D2) and the post (E) with the Bolts ① and the Connecting Flat Iron (H), as shown in Figure 7. Noble house Home Furnishings LLC 8 oF 13...
Page 9
Insert the long jacking tube (A) into the central device (I) and connect it with the spring clip, as shown in Fig.10. Connect the long jacking connector (B1) and the post (E) with the Bolts ① , as shown in Fig.11. Noble house Home Furnishings LLC 9 oF 13...
Page 10
Put the short jacking tube (A1) into the jacking bracket (C) and connect it with the spring clip, as shown in Fig. 12. Insert the short jacking tube (A1) into the upper beam connector (F1) and connect it with the spring clip, as shown in Figure 13. Noble house Home Furnishings LLC 10 oF 13...
Page 11
Put the small canopy cloth (J) on the top of the tent and put the top four corners into the long jacking tube(A) (See Fig.10.1). Put the large canopy cloth (K) on the top of the tent and put the four corners into the post (E), (see Fig.10.2). Noble house Home Furnishings LLC 11 oF 13...
Page 12
Connect the curtain (L) and the mosquito net pole (G/G1) with the Hook ④, as shown in (Fig. 11.2). Insert the stake ⑥ into the post (E), as shown in Fig. 11.3. Noble house Home Furnishings LLC 12 oF 13...
Page 13
4. Ensure all Bolts are fully locked into position. 5. This Gazebo can only be used on a flat, level surface. Warning!! If the Gazebo is not Stable, it could lead to damage to the product, and could cause injury to any occupants.