Do you have a question about the 15D and is the answer not in the manual?
Questions and answers
Jerry
March 5, 2025
Im using my H25D4 for sandblasting and im having problems with it pluging up due to to much moisture. wondering what i can do to control the moisture.
1 comments:
Mr. Anderson
May 14, 2025
To control moisture in a Sullivan-Palatek H25D4 used for sandblasting, use the water-cooled option with proper water flow and temperature control. Maintain water flow at 3 gpm with 60°F water, 3.7 gpm with 70°F water, or 5 gpm with 80°F water. Ensure the maximum water temperature does not exceed 85°F. Proper cooling helps reduce moisture in compressed air.
Need help?
Do you have a question about the 15D and is the answer not in the manual?
Questions and answers
Im using my H25D4 for sandblasting and im having problems with it pluging up due to to much moisture. wondering what i can do to control the moisture.
To control moisture in a Sullivan-Palatek H25D4 used for sandblasting, use the water-cooled option with proper water flow and temperature control. Maintain water flow at 3 gpm with 60°F water, 3.7 gpm with 70°F water, or 5 gpm with 80°F water. Ensure the maximum water temperature does not exceed 85°F. Proper cooling helps reduce moisture in compressed air.
This answer is automatically generated