Westinghouse WSFSFC92 Instruction Manual page 13

5. Press the buttons on the Control Panel (2) or remote
control (12) to select the desired functions (see OVERVIEW OF
CONTROL BUTTONS). The indicator lights on the Control Panel
show the current status of the fan.
6. Once you have finished using the fan, press the POWER button
to turn the fan to STANDBY MODE (stop), and then unplug the
power cord from the wall socket.
INDICATOR LIGHTS – AUTO-DIMMING FUNCTION
The Control Panel has an Auto-dimming function that reduces the
brightness of the indicator lights 15 seconds after the last button is
pressed. Press any button again, the brightness will back to normal.
CAUTION! Always unplug the appliance from the wall socket
when it is not in use to disconnect it completely from the power
supply.
WARNING! Never adjust the height of the fan while the
appliance is on.
CLEANING AND CARE
WARNING! Before cleaning, always unplug the appliance from
the wall socket. Wait until the blades have come to a complete
stop.
WARNING! To avoid electrical hazards, never immerse the
appliance, power cord or plug in water or any other liquids. Never
rinse them under the tap or spray with liquids. Make sure water
does not get into the motor, control panel or electrical parts while
cleaning.
NOTE: Never use solvents, chemical or abrasive cleaning agents,
wire brushes, sharp objects or scouring pads to clean the
appliance. Do not use gasoline, benzene, thinner or alcohol to clean
the appliance.
HOW TO USE
EN
13