Westinghouse WSFSFC92 Instruction Manual page 11

Control Remote
Panel Control
Button
（3S）
TIMER/
CHILD
LOCK
REMOTE CONTROL
• Before first use, pull out the battery insulating strip from the
battery compartment to start using the remote control. The
battery is included with the product.
• Replace the battery with the same or equivalent type of
battery.
Replacing the battery
• Hold the remote control with the back side facing up.
• On the bottom of the remote control, use your thumb (or a flat
screwdriver) to push and hold the small locking clip towards
the opposite corner of the clip. While still holding, pull the
groove on the battery compartment to slide it out (Fig. 1).
• Install a new battery (1 x CR2032 3V Lithium button battery)
with the + side facing up and close the battery compartment.
HOW TO USE
TIMER: Press to set the Auto Off Timer
•
and automatically turn the fan to
STANDBY MODE (stop) at a later time.
Press the button repeatedly to select
the desired time from 1 – 7 hours.
The indicator light(s) (1H/2H/4H) will
illuminate accordingly.
• CHILD LOCK: To lock the buttons
on the Control Panel (2), press and
hold the button for 3 seconds until
the indicator light next to the
icon illuminates. Press and hold for
3 seconds again to unlock the buttons.
Function
EN
11