Hitachi PV-XL300J Instruction Manual page 24

Cleaning the power head
Rotary brush maintenance.
Remove the brush holder.
1
Turn the power head over and remove the brush holder while pushing the tab in the direction of the arrow.
Tab
Detach the rotary brush and remove dust.
2
Rotary brush
Wash it with water.
 Do not use cleansers, bleach, etc. Doing so might cause discoloration, deformation, etc.
Note
 After washing with water, thoroughly air dry it in the shade before attaching it.
Adjust the rotary brush with the groove and attach it to its original position.
3
Attach the brush holder.
4
Insert the hook
Hook
Note When attaching the brush holder, fasten the hook fi rst. Failure to do so might cause damage.
E-24
PV-XL300J_EN.indd 24 PV-XL300J_EN.indd 24
Remove dust.
Washing the rotary brush with water
Shake to remove excessive water.
Drying it requires approx. 24 hours. (The drying time varies depending on the environment
and season.)
Brush holder
Remove tangled lint and
similar types of dirt in the
groove using tweezers, etc.
Tweezers
Groove
Groove
Firmly attach the brush holder until you hear a click.
(Continued)
Cut and remove tangled lint, hair,
fibers and similar types of dirt around
the rotary brush using scissors, etc.
Scissors
Thoroughly air dry.
Lean and let dry
in the shade
Click
2021/9/22 11:11:05 2021/9/22 11:11:05