Navigating To A Position Report Or Distress Call; Setting Up Dsc - Garmin GPSMAP 396 Pilot's Manual

Navigating to a Position Report or Distress Call

After a Position Report or a Distress Call is received, navigation can
be quickly set to the call location.
To navigate to a Position Report or Distress Call using
the Direct To key:
1. Press Direct To .
2. With Go To (MMSI/Name) highlighted, press ENTER.
To navigate to a Position Report or Distress Call using
the Call List or Log:
1. Highlight the call on the Call List or Log, and press
Direct To
.
2. With Go To (MMSI/Name) or (DSC) highlighted, press
ENTER.
Navigating to a DSC Call
GPSMAP 396 Pilot's Guide
M

Setting up DSC

The DSC Setup tab allows you to turn DSC On and Off. This Setup
tab also allows you to simulate Distress Calls and Position Reports
while the unit is in Simulator Mode (see
is helpful for practice before connecting to the real system. The
Distress Call simulator also helps to check if alarms are working
properly.
DSC Setup
M P F
ARINE ODE AGES AND EATURES
page 11). Simulating calls
> DSC
99