Control Panel; Menu Options - Chauvet Q-WASH 560Z-LED Quick Reference Manual

Hide thumbs Also See for Q-WASH 560Z-LED:
Table of Contents

Advertisement

Available languages

Available languages

Q-Wash™ 560Z-LED QRG

Control Panel

Description
Password

Menu Options

Main Level
INTRO
INVERT
RANGE
All manuals and user guides at all-guides.com
Button
Function
<MENU>
Exits from the current menu or function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases
<DOWN>
the numeric value when in a function
After being prompted, enter the following password by pressing:
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This password cannot be changed and must be used whenever prompted.
Programming Levels
ADDRESS
001~512
RESET
HIGH
NORMAL
FAN
AUTO
DMX512
AUTO 1
AUTO 2
RUN
CUSTOM
SLAVE
TEST
BASIC
CHANNELS
ADVANCED
60 CLOSE
DISPLAY
BRIGHT
KEYLOCK
DIMMER 4~1
DIMMER
DIMMER 0
INFO
EDITION
Pan
NORMAL/
Tilt
REVERSE
Dimmer
Use
P/Start
P/Finish
000~255
T/Start
T/Finish
Use
Selects a starting DMX address
NO
Resets the product's custom settings
YES
Select the fan's operation mode.
NOTE: The fan will come on High if product
LOW
is too hot, despite any manual or DMX
setting
Selects DMX running mode
Selects the first automatic program
Selects the second automatic program
Selects user-customizable program
Selects Slave mode
Starts the product's test sequence
Selects the 11-channel DMX mode
Selects the 15-channel DMX mode
G1
Selects the 15-channel DMX mode
Turns off the display after 60 seconds
Keeps the display on
NO
Activates/deactivates the control panel
password
YES
Slow (DIM 4) to fast (DIM1) dimmer curves
Linear dimmer
Shows the version of the installed S/W
Defines the pan direction
Defines the tilt direction
Defines the direction of the dimmer fader
NO
Activates the changes
YES
Sets the pan start point (restricted range)
Sets the pan end point (restricted range)
Sets the tilt start point (restricted range)
Sets the tilt end point (restricted range)
NO
Activates the changes
YES
4
EN
Description

Advertisement

Table of Contents
loading

Table of Contents