Audio And Display Setup - Garmin GPS 95 STD Personal Navigator Owner's Manual

To set the count down timer...
· Place the cursor on the timer option field.
· Press CLR to select "count down".
· Press the right arrow key.
· Enter the number of hours to count down from and press ENT.
· Enter the number of minutes to count down from and press ENT.
· Enter the number of seconds to count down from and press ENT. The
count down timer will begin counting down from the selected time.

8.10 AUDIO AND DISPLAY SETUP

feedback tone off, but leave the message tone on; have both tones on; or
have both tones off.
To turn audio tones on/off...
· Highlight the tone option field.
· Press CLR to select the desired option.
You may also adjust the contrast of the GPS 95 display to your preferences.
To change the display contrast...
· Highlight "Change Contrast?" and press ENT.
· The contrast bar is highlighted. Press the left or right arrow key to
change the contrast level.
· When the desired contrast level is reached, press ENT.
The backlighting time-out determines the length of time the display and
keypad backlighting will remain on. If no keys are pressed for the specified
time, the backlighting will automatically shut off to conserve battery power.
From the Audio/Display Page you can
turn the message and/or keypad tones
on and off, change the display contrast
and change the time-out for the display
backlighting.
The tone option allows you to turn the
GPS 95's audio tone on or off as
desired. You may turn the keypad
8-11