Activating And Inverting Routes; Editing Routes - Garmin GPS 95 STD Personal Navigator Owner's Manual

6.3 ACTIVATING AND INVERTING ROUTES

Routes are also activated on the Route Definition Page. You may activate
any route in the displayed order, or in reverse order. (NOTE: Remember,
when a new route is activated, the previous contents of route 0 will be
overwritten. If you wish to save route 0, be sure to copy it to an empty route
first.)
· Highlight the route action field, and with CLR select ">Activate?".
· Press ENT to activate the route.

6.4 EDITING ROUTES

Existing routes may be edited from the Route Definition Page.
To Edit an Existing Route...
6-4
To activate a route...
· Press RTE and, if needed, the
RTE softkey to display the Route
Definition Page.
· Highlight the route number field
with the cursor and select the route
number to activate with CLR.
To invert a route...
· Follow the same steps as above
for activating a route, but select
">Invert?" at the route action field.
· Press ENT to activate the route in
an inverted order.
· Press RTE and, if needed, the
RTE softkey to select the Route
Definition Page.
· Highlight the route number field
with the cursor and select the route
you wish to edit.