Table of Contents
Advertisement
NL Home Connect
Scan the QR code using the Home
1.
Connect app.
Follow the instructions of the
2.
Home Connect app.
Home Connect settings
Adapt Home Connect to your needs.
You will find the Home Connect
settings in the basic settings of your
appliance. Which settings the display
shows depends on whether Ho-
me Connect is installed and whether
the device is connected to the home
network.
Remote Start
You can start the appliance with your
mobile terminal device via the Home
Connect app.
Tip: If you are in the "Basic Settings"
→ Page 38 of this function "rc2"
the function is permanently activated
and you can start the device at any
time with a mobile end device.
Remote Start
If you have set "rc1" in the basic
settings of this function, you activate
the function on your device.
40
activate
Conditions
s The device is connected to the WLAN
home network connected.
s The appliance is connected to the Home Con-
net app connected.
s In the "Basic settings"
→ Page 38 of this function is
"rc1" set.
s A program has been selected.
▶
impressions.
When you open the appliance door, the
function is automatically deactivated.
a Button is lit.
Tip: To deactivate the function on
to press.
Remote diagnosis
Customer service can access your
device via remote diagnosis if you
contact customer service with the
appropriate request, your device is
connected to the Home Connect
server and the remote diagnosis is in
the country in which you are using
the device is available.
Tip: More information as well as
hints on the availability of remote
diagnosis in your country can be
found in the service/support section
of the local website: www.home-
connect.com
Software update
With this function you can update the
software of the device, e.g. for
optimisations, correcting errors or for
security-relevant updates.
The Home Connect app informs you
about available software updates.
Advertisement
Table of Contents
