Table of Contents
Advertisement
NL Rinse System
according to the manufacturer's
instructions, only use up to a
degree of hardness of 21 °dH
without adding softening salt.
s The water hardness is 0 - 6
°dH. You don't need softening salt
to use.
on
to press.
1.
Approx. 3 seconds on
2.
to access the basic settings.
a The display shows Hxx.
a The display shows
to give.
Press as many times until
3.
the display shows H00.
To save the settings, press for
4.
approx. 3 seconds.
a The water softener has been
switched on and the refilling salt
indicator is deactivated.
Regenerate the softening
system
In order to maintain trouble-free
operation of the softening system,
the device regularly performs a
regeneration of the softening system.
The softening system is regenerated
in all programs before the end of the
main wash cycle. This increases the
running time and the consumption
values of, for example, water and
electricity.
Overview of the consumption values
when regenerating the
softening system
Here you will find an overview of the
maximum extra runtime and
consumption values when
regenerating the softening system.
28
Regenerating the softening
system after x washings
Additional running time in minutes
Additional water consumption in liters
Additional electricity consumption in kWh
The stated consumption values are
laboratory measured values which
are determined according to the
Busy-
currently valid standard and based on
the Eco 50° program and the factory-
set water hardness value of 13 - 16
°dH.
Rinse System
s You can wash dishes and glasses
without a problem using the rinse
system and rinse aid.
rinse aid
For optimal drying results it is best
to use the rinse aid.
Only use rinse aid for household
dishwashers.
Filling rinse aid
If the rinse aid refill indicator lights
up, add rinse aid. Only use rinse aid
for domestic dishwashers.
6
7
5
0.05
Advertisement
Table of Contents
