Finger tighten and then secure tightly with the Allen key provided.
q
DO NOT ATTEMPT TO OPERATE YOUR LATHE UNTIL IT IS COMPLETELY
ASSEMBLED AND ADJUSTED ACCORDING TO THE INSTRUCTION
MANUAL.
Adjustments
Headstock
The headstock has 5 pre-set positions.
q
0
degrees
applications, 60, 90 and 120 degrees for
use when making faceplate turnings and
180 degrees when using the extension
bed and the tool rest.
To set the headstock in the desired
q
position you must first turn the headlock handle (1) until you have
completed at least one full rotation.
Pull out the headstock release (2).
q
Rotate the entire headstock in a
q
clockwise rotation to the desired position.
The headstock will 'click' into one of the
pre-set settings.
Tighten the headlock handle (1).
q
for
all
spindle
turning
8