Dog Alerts Setup; Display Setup; Tones Setup - Garmin Astro 220 Owner's Manual

Dog Alerts Setup

Use Dog Alerts to enable/disable pop-ups if your dog's
status changes. Refer to page 11 for information about
how to identify your dog as a specific type and eliminate
unwanted alerts. To silence these alarms when they are
not wanted, check the Mute box on the Tones Setup page.
• On-Point Alert—indicates that the dog is on-point.
• Treed Alert—indicates that the dog has treed
quarry and has confined its movements to a small
area for 60 seconds.
• GPS Lost Alert—the dog's DC 20 has lost GPS
satellite signals.
• Lost Communication Alert—the Astro 220 is not
receiving the DC 20 (out of range, lost power, etc.).

Display Setup

Use Display Settings to select a screen display color
scheme for day and night viewing. You can set the
backlight timeout and the level of brightness and shorten
the timeout to save on battery power.
Astro Dog Tracking System Owner's Manual
• Display Mode—sets the display to Day, Night, or
Auto mode. Select Auto to automatically switch from
day to night at sunset and change back at sunrise.
• Daytime Color Scheme/Nighttime Color
Scheme—sets the color scheme to use when
operating in Day or Night mode.
• Backlight Timeout—sets the backlight to stay on
when turned on, or time out after period of time has
elapsed when using the battery.
• Backlight Level—turns the backlight up or down.
Press up on the ROCKER to increase the intensity

Tones Setup

Use the Tones Setup page to customize sound tones made
by the Astro 220.
To setup Tones:
1. Select Tone.
2. Select the desired option and each one sounds.
3. Press ENTER to select a tone.
S
ettInGS