Screen Buttons - Garmin Astro 220 Owner's Manual

d t
oG rackInG
Dog status fields
Positon update
rate and dog
communication
ID No.
DC 0 GPS signal
strength
The dog being tracked is named at the top of the Dog Info
page. The fields below the name show the dog's status
(a Running, Sitting, Treed, On-Point, or Unknown?), the
distance from your location, the distance traveled, and the
average speed. The field titled "Dog Unit", indicates the
position reporting update rate, the user assigned DC 20
ID number (0-49), the DC 20 battery capacity, the DC 20
to Astro 220 communication signal strength, and the DC
20 GPS signal strength.
0
Naming the dog
Dog name
By default the Astro 220 assigns the name Dog (Dog 1,
field
Dog 2, etc.) to every Dog Unit (DC 20) linked to it. When
you use the ROCKER, to select the Name Field on the
DC 0 battery
Dog Info page and press ENTER, an on-screen keyboard
capacity
appears. Use the ROCKER to move about the keyboard
DC 0
to place your dog's name in the Name Field. Select OK
communication
and press ENTER when done.
signal strength
Using the Go To, Map, and Reset on-

screen buttons

• Selecting the Go To button at the bottom of the
page and pressing ENTER takes you to the Map
page with directions for navigating to your dog.
• Selecting the Map button takes you to the Map
page to view the location and movement of your
dog.
• Selecting the Reset button resets the dog stats and
track log for that dog.
Astro Dog Tracking System Owner's Manual