Vaux Electronics 1600 Series Owner's Manual page 11

Adjusting Zone Volume and Muting:
•
Press the RC-16's Volume-Up/Down buttons, and release at desired volume level.
Note: This will automatically place the remote in A/V mode.
•
Press the RC-16's Mute button -- the zone volume lowers to the programmed Mute-Volume-Level for the zone. Pressing
Mute again will restore original volume.
•
The Lattis Ack light flashes during volume adjust or mute. If the Lattis Nak light flashes, the requested zone is not valid for
this Lattis unit, or the zone is not currently on.
Adjusting Zone Bass/Treble:
•
Press the RC-16 Shift button, and then press a Channel-Up/Down button to adjust Bass, or a Volume-Up/Down button to
adjust Treble. Each Shift-button-press adjusts up or down one step (can not press-and-hold for Bass/Treble adjustment)
•
The Lattis Ack light flashes as the level is adjusted. If the Lattis Nak light flashes, the requested zone is not valid for this
Lattis unit, or the zone is not currently on.
•
You may restore Flat Bass/Treble (both to 0-dB) by pressing Shift-Rew on the RC-16.
11