GASLAND chef Pro Series Installation Instructions Manual page 17

3. Single Burner Installation
• Check and confirm each part of the burner. For 18K BTU / 12K BTU single
burner part (from left to right):
• Note the stationary positioning of the electrode.
• There are 2 grooves along the outer rim of the burner base and an arrow on
the top surface. The arrow points to the groove that should accept the
electrode.
• The brass flame ring has 4 notches along the bottom outer ring, these must
set directly over the 4 lugs on the burner base.
• The burner cap has 2 protrusions under it, these sit in either 2 sets of the
triangular depressions on the surface of the burner base.
For Any Installation / Parts / Customer Service Issue,
1 (844) 538-7890
support@gaslandchef.com
burner cap / flame ring / flame ring base
please contact 1(844)538-7890 or
email support@gaslandchef.com
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
16